La línea de productos de equipo Cat, que consta de más de 300 máquinas, establece el estándar para la industria.
Tenemos la intención de ayudarle a satisfacer sus necesidades con nuestro equipo, con nuestro sistema de distribución y soporte de productos, y la incorporación constante y actualización de productos.
| Descripción | Valor | |
|---|---|---|
| Bit Load | 24 000 kg (52,911 lb) | |
| Hole Diameter | 152-244 mm (6-9.625 in) | |
| Engine | C27 (Tier 2) – 597 kW (800 hp) at 2,100 rpm | |
| Capacidad de potencia | 182 | 135 |
| Potencia nominal | 800 | 597 |
| Compressor | 48 m³/min (1,700 ft³/min) 6.9 bar (100 psi) | |
| Engine Cat® C27 Tier 2 | 597 kW (800 hp) at 2,100 rpm | |
| Hole Depth Single-pass (12 m/39 ft mast) | Up to 12.80 m (42 ft)/Multi-pass Up to 55.47 m (182 ft) | |
| Hole Depth Single-pass (15 m/49 ft mast) | Up to 15.85 m (52 ft)/Multi-pass Up to 31.08 m (102 ft) | |
| Torque | 0-13 015 N·m (0-9,600 ft-lb) | |
| Tanque de combustible | 765 | 2986 |
| Manufacturer | Caterpillar | |
| Model | C27 Tier 2 | |
| Potencia nominal optativa | 875 | 652 |
| Capacidad de levantamiento | 65300 | 290 |
| Number | 4 | |
| Diámetro del taco | 24 | 610 |
| Discharge air flow (sea level) | 33 m3/min (1,150 ft3/min); 38 m3/min (1,350 ft3/min); 43 m3/min (1,500 ft3/min) | |
| Maximum operating pressure | 10.3/24.1 bar or 10.3/24.1/34.5 bar (150/350 psi or 150/350/500 psi) | |
| Type (high pressure) | Oil-flooded, two-stage screw | |
| Jacks, mast pivot and deck | Welded integrally to mainframe | |
| Machine deck | Access both sides | |
| Bit/hole diameter | 152-244 mm (6-9.625 in) | |
| Depth multi-pass (12 m/39 ft mast) | Up to 55.47 m (Up to 182 ft) | |
| Depth single-pass (15 m/49 ft mast) | Up to 15.85 m (Up to 52 ft) | |
| Opción para tiempo frío | -40.0 | -40.0 |
| Clasificación máxima ambiental (estándar) | 125.0 | 52.0 |
| Clasificación mínima ambiental (estándar) | 30 | -1 |
| Capacidad del recolector de polvo | 4500 | 127 |
| 12 m (39 ft) mast arrangement | 4 pods; 10.67 m (35 ft) long pipe | |
| 15 m (49 ft) mast arrangement | 2 pods; 7.62 m (25 ft) long pipe | |
| Type | Carousel, with stationary pods and breaker plates | |
| Climate control | Wall-mounted, AC/heating/pressurizing unit | |
| Área del piso | 32.4 | 3.0 |
| Altura en el interior | 76.5 | 1943.0 |
| Number of doors | 2 with windows (included above) | |
| Number of windows | 10 | |
| Other | Window wipers and washers | |
| Type | Shock-mounted; two-man, integrated FOPS certified | |
| Ventanas (vidrio polarizado de seguridad con montaje de caucho) | 0.25 | 6.0 |
| Altura de la mesa sobre el suelo | 52.0 | 1321.0 |
| Automatic cable | Hydraulic cylinder, tensioning | |
| Cable type 25 mm (1 in) | DYFORM 8 | |
| Drilling feed/retract rate | 0-39.3 m/min (0-129 ft/min) | |
| Desplazamiento del cabezal (12 m/39') | 572.4 | 14.54 |
| Desplazamiento del cabezal (15 m/49') | 693.0 | 17.60 |
| Rated hoist capacity | Up to 222 kN (Up to 50,000 lbf) | |
| Rated pull-down capacity | Up to 222 kN (Up to 50,000 lbf) | |
| Brakes | Spring set, hydraulic release | |
| Front axle | Three-point oscillating type | |
| Rendimiento en pendientes con el mástil hacia abajo | 48%/25.6 degrees | |
| Potencia máxima del mando por cadena | 204.0 | 152.0 |
| Number of lower rollers | 12 | |
| Rock guards/chain guides | Standard full-length guards | |
| Velocidad máxima de desplazamiento | 1.25 | 2.0 |
| Cable size | 0.5 | 13.0 |
| Capacity | 3500 | 1587 |
| Flujo de descarga de aire (a nivel del mar) | 1700 | 48 |
| Presión de operación máxima | 100 | 6.9 |
| Type | Oil-flooded, single-stage screw | |
| Note | Both dry and water injection can be mounted on the same drill | |
| Drill Pipe (Optional, Price-Adder) – 12 m (39 ft) mast arrangement: Diameter (customer specification) | 114-178 mm (4.5-7.0 in) | |
| Drill Pipe (Optional, Price-Adder) – 12 m (39 ft) mast arrangement: Wall thickness | 0.75 | 19 |
| Drill Pipe (Optional, Price-Adder) – 12 m (39 ft) mast arrangement: Length | 35 | 10.67 |
| Drill Pipe (Optional, Price-Adder) – 12 m (39 ft) mast arrangement: Threads | Depends on pipe diameter | |
| Drill Pipe (Optional, Price-Adder) – 15 m (49 ft) mast arrangement: Diameter (customer specification) | 114-178 mm (4.5-7.0 in) | |
| Drill Pipe (Optional, Price-Adder) – 15 m (49 ft) mast arrangement: Wall thickness | 0.75 | 19 |
| Drill Pipe (Optional, Price-Adder) – 15 m (49 ft) mast arrangement: Length | 25 | 7.62 |
| Drill Pipe (Optional, Price-Adder) – 15 m (49 ft) mast arrangement: Threads | Depends on pipe diameter | |
| Top Adapter Sub – Diameter | Depends on pipe diameter | |
| Top Adapter Sub – Length | 28 | 711 |
| Top Adapter Sub – Top thread (API Reg.) | 5.5 | 140 |
| Top Adapter Sub – Bottom thread | Depends on pipe diameter | |
| Bit Sub – Table bushing | One (1) piece insert, roller deck bushing or two-piece | |
